What A440 is and why musicians tune to it
When an orchestra tunes up before a concert, the players are all matching one note: an A. This guide explains what that note is, why musicians agree on it, and how it can help you train your ear.
What 440 Hz means
Sound is vibration, and pitch is how fast something vibrates. Speed of vibration is measured in hertz (Hz), which means cycles per second. A note at 440 Hz vibrates 440 times every second.
A440 is the A just above middle C, also written A4, tuned to 440 Hz. It is often called concert pitch. When a tuner, a tuning fork or a music app gives you “an A”, this is usually the note it means.
Every other note follows from it. An octave up doubles the frequency, so the next A up is 880 Hz. An octave down halves it, so the A below is 220 Hz. On a piano tuned in the usual way, called equal temperament, each semitone multiplies the frequency by the same amount, a little under 1.06. That puts middle C at about 261.63 Hz and the B above A440 at about 493.88 Hz.
Why everyone agrees on one A
Instruments hold their tuning in different ways. A piano is tuned by a technician and then stays roughly where it was set for months. A violin’s strings slip a little as they warm up and are retuned before playing. Wind players adjust their instruments by moving a joint or a mouthpiece.
If each player tuned to a slightly different A, the group would clash even when everyone played the right notes. A shared reference fixes that. Everyone matches the same A, and the rest of their notes fall into place around it.
In an orchestra, the oboe traditionally plays the A that everyone else tunes to. In a band or a practice room, it is more likely to be an electronic tuner. Most tuners are set to A440 by default and let you change it if you need to.
A short history
A440 has not always been the standard. For centuries the pitch of A varied from place to place and from one period to another, so the same piece could sound noticeably higher in one city than in another.
During the twentieth century, 440 Hz became the widely accepted reference, and it is now set out in an international standard, ISO 16. Some orchestras still choose to tune a little higher, such as 442 Hz, for a brighter sound. Many groups playing Baroque music on period instruments tune to A = 415 Hz, which is close to a semitone lower than A440.
None of these choices is right or wrong. What matters is that everyone playing together uses the same one.
How a reference note helps your ear
Naming a note with nothing to compare it to means recognising that pitch on its own. Very few people can do this reliably. That skill is called absolute pitch.
Naming a note after hearing a known reference is a different task. If you know the first sound is A, you only need to judge the distance from A to the next note. That is relative pitch, and it improves with practice for almost everyone.
This is why the reference mode in ToneWren’s pitch practice plays A440 before every note. It turns a memory puzzle into a measuring task. Over time, the distances start to sound familiar, and you can begin to recognise them quickly.
Using A440 away from the game
- Before you sing, play an A from a tuner or app and hum along until it feels settled.
- Try humming an A from memory, then check it against a tuner. Treat it as a curiosity, not a score. A guess that drifts is normal.
- If you play an instrument, tune it by ear to a reference A, then check with a tuner. Listening for the wobble, or beating, between two nearly matching notes is useful practice in its own right.